Fleet Air Arm Leather Flying Jacket

Approved by the Fleet Air Arm this superb jacket was designed by members of the FAA and is set to become a firm favourite with the FAA crew as part of their official uniform, which has the cold weather lining - and now you can own this stylish jacket too as a standard leather jacket NO cold weather lining. PLEASE NOTE: THIS JACKET DOES NOT HAVE THE VELCRO PATCH.

(FAA members - this standard jacket is NOT part of the official uniform only the FAA with cold weather lining and fur collar with Velcro patch is acceptable).

The Fleet Air Arm are responsible for the operation of naval aircraft. The FAA currently operates the AugustaWestland Merlin, Westland Sea King and the AugustaWestland Wildcat helicopters and the BAE Hawk.

The FAA Jacket is a standard leather jacket.

Product Specification

Leather
Specially prepared steer hide.

Colour
Dark Brown

Collar
Leather

Lining
Tan - 100% Cotton Drill.

Cuffs
Cotton knit around sleeves and base of jacket

Epaulettes
Secured with Velcro.

Pockets
Two outside patch pockets with side entry pocket behind
One inside pocket secured with stud

Sleeve
Composite zip pocket on sleeve with pen holder

Sizes
36" to 48" regular or long cut.

Length:
Jackets are cut either 'regular' or 'long'. Please note: LONG does not mean a longer jacket it generally is only applicable to clients who are over 6 foot (183cms) Our 'long' cut sizes provide additional length on sleeve and back lengths for our taller clients only.

Jacket Size Guide

We suggest men order the same size jacket as their actual chest measurement.

Length: Jackets are cut either 'regular' or 'long'. Please note: LONG does not mean a longer jacket it generally is only applicable to clients who are over 6 foot (183cms) Our 'long' cut sizes provide additional length on sleeve and back lengths for our taller clients.

If you are 6' or 1.83m or 72" or above we would suggest ordering a 'long' or if you find you normally need longer sleeve lengths when purchasing garments.

Measuring back Length
We measure back length from the nape of the neck (collar seam) to the base of the jacket.

Measuring Sleeves
We measure sleeves from the top of the arm to about 1" (24mm) below the wrist bone. Please see table below for the sleeve length of our jackets.

International clients please see the conversion chart below to establish the equivalent UK size needed.

Mens International equivalent sizes