The Start Pac Portable Power Supply model 53025/24 is designed to power up 24 Volt aircraft systems. The voltage output is set to 28.5 Volts to simulate the same voltage as when the aircraft is running under power. Maximum amperage output is 25 amps which is adequate for most light aircraft. If overloaded, the 53025/24 will trip off and reset itself after a short period of time. This unit is ideal for powering up new and old aircraft with glass cockpits.
This unit is NOT designed for engine starting or battery charging.
When utilizing the 53025/24, the entire aircraft electrical system can be powered up for GPS programming and electrical maintenance. Thus the on board aircraft battery can be saved for starting.
Do not use for starting as starter motors require far more amperage than is available from the Start Pac Portable Power Supply. This unit will operate on 110/220Volt AC input.
Do not cover or enclose this Start Pac when using, as this will inhibit airflow needed for cooling purposes.
- # AC INPUT: 100 to 220 VAC, 7 amps
- DC OUTPUT: 25 amps @ 28.5 Volts
- 9 Lbs./4.08 kilos complete
- L 14 x W 5.25 x H 5.5/ L 36cm x W 13cm x H 14 cm
- Continuous duty fan cooled
- Over current protection
- Over voltage protection
- Over temperature protection
No reviews yet, please leave a review below
The Start Pac Portable Power Supply model 53025/24 is designed to power up 24 Volt aircraft systems. The voltage output is set to 28.5 Volts to simulate the same voltage as when the aircraft is running under power. Maximum amperage output is 25 amps which is adequate for most light aircraft. If overloaded, the 53025/24 will trip off and reset itself after a short period of time. This unit is ideal for powering up new and old aircraft with glass cockpits.
This unit is NOT designed for engine starting or battery charging.
When utilizing the 53025/24, the entire aircraft electrical system can be powered up for GPS programming and electrical maintenance. Thus the on board aircraft battery can be saved for starting.
Do not use for starting as starter motors require far more amperage than is available from the Start Pac Portable Power Supply. This unit will operate on 110/220Volt AC input.
Do not cover or enclose this Start Pac when using, as this will inhibit airflow needed for cooling purposes.
- # AC INPUT: 100 to 220 VAC, 7 amps
- DC OUTPUT: 25 amps @ 28.5 Volts
- 9 Lbs./4.08 kilos complete
- L 14 x W 5.25 x H 5.5/ L 36cm x W 13cm x H 14 cm
- Continuous duty fan cooled
- Over current protection
- Over voltage protection
- Over temperature protection
Related Products